基于振动分析的坦克柴油机汽缸燃烧压力检测方法

针对在坦克实车上不易直接测量柴油机汽缸压力的问题,提出了一种通过测量柴油机汽缸盖振动信号来间接检测汽缸燃烧压力的方法。在某型坦克柴油机上同步测量了汽缸燃烧压力、汽缸盖振动信号和变速箱振动信号,利用自适应滤波方法滤除了汽缸盖振动信号中包含的变速箱振动信号形成的噪声干扰,利用配气相位从时间域分离出由气体燃烧压力激发的振动信号,利用Hilbert变换和小波分解方法分别提取了振动信号和压力信号的特征波形。建立了RBF神经网络模型,以汽缸盖振动信号的包络作为网络输入,实现了汽缸燃烧压力的间接检测。     

关联维数在梁式结构损伤检测中的应用

为探索有效实用的结构损伤检测方法,运用分形理论直接对结构振动信号进行关联维数分析,通过度量系统输出的奇异性来识别结构的局部损伤,提出了基于振动响应关联维数的结构损伤检测方法.简支梁损伤算例结果表明,该方法能够准确地检测出梁式结构单个和多个不同程度的损伤位置,同时关联维数指标变化值会随着损伤程度的增加而增大.与曲率模态指...     

921A钢在海水中腐蚀的力学化学效应

为了研究弹性应力和弹塑性应变对921A船体钢在模拟海水中腐蚀行为的影响,采用自制的载荷-电化学实验装置对921A钢在载荷与腐蚀介质协同作用时的开路电位、动电位极化曲线和电化学阻抗谱等电化学性能进行了测试,并由电化学阻抗谱拟合得到的电荷传递电阻定义载荷下的腐蚀速率修正因子,将实验得到的腐蚀速率修正因子与理论值进行了对比。结果表明:弹性拉应力与弹性压应力对力学化学效应的影响具有对称性。力学化学效应随着弹性应力的增大而增大,随着弹塑性应变的增大先增大后减小。弹塑性应变对力学化学效应的影响远远大于弹性应力的影响。在研究范围内,弹塑性应变引起的腐蚀电位负移量最大为62.6 mV,相应的腐蚀速率修正因子高达4.113,而弹性应力引起的腐蚀电位负移量最大为24.5 mV,相应的腐蚀速率修正因子为1.746。由此可见,应力应变对921A钢在海水中腐蚀行为的影响不容忽视。     

Noise and vibration measurements in a Viking military vehicle

Noise and whole-body vibration measurements were made in a Viking military vehicle to determine the variation that should be expected during repeat measures, the effect of speed (up to 60 km/h in 5 km/h increments), and during travel over different types of terrain (comprising concrete road, gravel track and rough cross-country). Measurements were made at various crew positions (including the driver and commander) in both the front and the rear cabs in the vehicles. Three translational axes of vibration were measured in each seat. Two speeds were investigated over road (35 km/h and 55–60 km/h) and gravel (20 km/h and 35 km/h) surfaces. The effect of varying speed of the vehicle on the measured noise and vibration magnitudes was also investigated. The highest sound pressure level (L_Aeq) of 104 dB(A) was measured at the commander’s standing position during travel over concrete road at 55 km/h. Higher noise levels occurred for a standing commander compared with when sitting on the seat. A maximum single axis frequency-weighted vibration magnitude of 1.0 m/s² r.m.s. was measured on the driver’s seat during travel over track at 35 km/h. Higher vibration magnitudes occurred during travel over track compared with travel over road. Both noise and vibration exposure of crew within the Viking vehicle increased with increasing speed of the vehicle.     

Static and free vibration analyses of functionally graded porous variable-thickness plates using an edge-based smoothed finite element method

The main purpose of this paper is to present numerical results of static bending and free vibration of functionally graded porous (FGP) variable-thickness plates by using an edge-based smoothed finite element method (ES-FEM) associate with the mixed interpolation of tensorial components technique for the three-node triangular element (MITC3), so-called ES-MITC3. This ES-MITC3 element is performed to eliminate the shear locking problem and to enhance the accuracy of the existing MITC3 element. In the ES-MITC3 element, the stiffness matrices are obtained by using the strain smoothing technique over the smoothing domains formed by two adjacent MITC3 triangular elements sharing an edge. Materials of the plate are FGP with a power-law index (k) and maximum porosity distributions (Ω) in the forms of cosine functions. The influences of some geometric parameters, material properties on static bending, and natural frequency of the FGP variable-thickness plates are examined in detail.     

Quasi-steady aerodynamic characteristics of Terminal Sensitive Bullets with short cylindrical portion

The aerodynamic characteristics are vital for short cylindrical Terminal Sensitive Bullets(TSB)with low aspect ratio,especially in terminal trajectory.Currently,there is little research in terms of the TSB and short cylinder with two free ends,and particularly in this trajectory,where the scanning angle β and roll angle α vary over a broad range between 0° and 180°.In this work,wind tunnel experiments are first conducted to learn the effects of Reynolds number and scanning angle on aerodynamic parameters for short cylinder with aspect ratio L/D = 1.Similar to infinite cylinder,for the short cylinder with two free ends,the drag crisis phenomenon still exists in the critical regime 1.7 × 105 ≤ Re ≤ 6.8 × 105.Then 3D simulations are performed to demonstrate the aerodynamic characteristics of short cylinder and TSB over a broad range of Re,L/D,α and β.The sensitivity analysis of time step and grid are presented as well.When β=0°,for short cylinder,the drag crisis phenomenon was also observed in the simulation,but not as obvious as in the wind tunnel test.In some attitudes,there is an obvious Kármán vortex in the wake of short cylinder and TSB.The correlation between time-averaged aerodynamic coefficients and L/D,Re,α&β is discussed.The vortex shedding frequency and shear layer behavior are obtained for quasi-steady and unsteady flow.Finally,the effect of end's shape on drag reduction and vortex shedding frequency is analyzed.     

水下声探测系统载体振动干扰分析及抑制方法

针对水下探测系统载体振动对目标回波信号的微多普勒特征谱产生干扰的问题,从干扰产生的基本原理出发,推导了干扰的近似乘性表达式。在获取振动干扰数据的条件下,提出了针对乘性干扰的干扰抑制算法,并针对推导干扰乘性表达式时的近似条件,分析了近似算法带来的误差。仿真结果表明,该方法可有效抑制水下探测系统平台振动对目标回波信号的微多普勒特征谱产生的干扰,并且在绝大多数情况下,由算法带来的误差可以忽略不计。     

舰船管路橡胶减振器的应用

简要分析了管路橡胶减振器对刚性管路的隔振原理,提出了几种通过改变管路布置形式而达到对管路各自由度上减振的方法,阐述了在实际应用中如何调整橡胶隔振器的固有频率而达到对舰船管路良好的隔振.     

小波理论在大型空间智能结构振动控制中的应用

采用最优控制理论设计智能结构主动振动控制器,针对大型空间智能结构的低频和密频的特性,基于小波尺度函数变换,设计了智能结构的传感器、致动器;最后通过针对某大型空间智能桁架结构的仿真,表明该控制方法是行之有效的。     

强迫振动法大跨度桥梁节段模型气动导数辨识

研制了桥梁节段模型颤振导数测定的二维强迫振动实验装置,采用变频调速技术实现对振动频率的控制,模型惯性力、气动力的测量采用了特殊设计的测力元件,模型运动用压电式加速度计进行测量。实验时,模型分别作单自由度的竖弯或扭转的简谐运动,通过测量模型所受到的气动力及模型位移,应用谱分析方法和非线性曲线拟合算法实现了对八个颤振气动导数的辨识,并通过平板模型实验数据与Theodorsen理想平板数据及国外文献数据对比对实验装置及辨识算法进行了检验。